Details

Description:

Lutron MS-7003 is a moisture meter intended for use in wood and concrete. Measurements are taken using two sharp pin electrode for in-material immersion.

Wood and concrete moisture measurement
Wood material: (0-40)% moisture content
Concrete material: (0-100)% moisture content
Red LED bar graph indicator with LCD display
Meter build in test probe, all in one, easy operation
Data hold, Record ( max., min. )
LCD display with the red LED bar graph
Supply: 9V battery ( 006P )

Features:

1.Designed to check the moisture level of wood, concrete,and other non-wood material.

2.6 % to 40 % moisture range on wood.

3.0 to 100% relative moisture value for Concrete and other non-wood material.

4.Red LED bar graph indicator and LCD digital display.

5.All in one, meter build in the test pins.

6.Optional separate probe, available for remote measurement.

7.Microprocessor circuit assures maximum possible accuracy, provides special functions and features.

8.Records Maximum & Minimum reading with recall.

9.Data hold function to freeze the desired value on display.

10.Heavy duty & compact housing case, designed for easy carry out & operation.

11.Built-in low battery indicator.

Specification:

Applications:Designed to check the moisture level of wood, concrete and other non-wood material.
Principal:Used the 2 pins electrode to measure the conductiv ability of the species, then converter to the reading of % " Moisture of Content".
Circuit:Custom one-chip of microprocessor LSI circuit.
Display:LCD size : 51 mm x 37 mm
Digit size : 16 mm ( 0.62 " )
Material 1 :0 to 100% relative moisture value for Concrete.and other non-wood material.
Material 2 :6 % to 40 % moisture range on wood.
Resolution:0.1 %.
Accuracy:+-( 5 % + 5 d )
         @23+-5C
         @Material 1 : 13%to 100%
         @Material 2 : 6%to 40%
Probe:2 pins moisture electrode.
Data Hold:By push button on front panel.
Memory Recall:Records Maximum & Minimum reading value.
Sampling Time:Approx. 0.8 second.
                      Operating 0 to 50C( 32 to 122F).
Temp./Humidity:Less than 80 %RH.
Power Supply:Alkaline 006P, MN1604 ( PP3 ) DC 9V battary.
Power Current:Approx. DC 16 mA.
Weight:251 g/0.55 LB.
Dimension:216.5 x 68.5 x 29.7 mm ( 8.4 x 2.7 x 1.2 inch ).
Accessories:Instruction manual.................... 1 PC.
Included:Extra contact pins......................1 Set.
Optional:Separate Probe, MP-31
Accessories:Hard Carrying Case, CA-06
            Soft Carrying Case, CA-05A