Standard equipment

Ventilation and Control

--natural convection

--continuous adjustment of pre-heated fresh air admixture

--vent connection with restrictor flap

--fuzzy-supported PID microprocessor controller with integrated auto diagnostic system with fault indication

--solid state switching unit

--2 Pt100 sensors Class A in 4-wire-circuit, mutually monitoring and taking over the performance at the same temperature value

--digital 7-day-programme-timer with real time clock, precise minute setting, for one set value or ramp operation in combination with:

--integrated digital timer for tempering profile with max. 4 segments, each segment adjustable from 1 min to 999 hours: DELAYED ON ,HEATING UP , HOLD or HOLD set-temperature-dependent with guaranteed holding time, COOLING DOWN

--"Loop" function to repeat profile 1-99 times or endless

--digital display (LED) of all set parameters, such as temperature, weekdays, time, programme status and set-up values

--resolution of display for set value and actual value 0,1 °C

--long-term logging (ring store) of all relevant data, GLP-conforming as data logger - 1024kB

--serial interface RS 232 including MEMMERT Software "Celsius" for programming and documentation

--incl. works calibration certificate for +37 °C

Triple Overtemperature Protection

--in case of overtemperature due to failure, the heating is switched off at approx. 3 °C above the set temperature (fixed value)

--independently working, digitally adjustable electronic overtemperature controller TWW protection class 3.1

--resolution of display and setting accuracy: 0,1°C

--mechanical temperature limiter TB protection class 1 switching the heating off at approx. 10 °C above max. oven temperature

Textured Stainless Steel Casing

--w x h x d: 1190 x 1080 x 650 mm

--fully insulated stainless steel doors with double locking and 4-point adjustment

--inner glass doors

--rear zinc-plated steel

Interior - Heating Concept

--w x h x d: 1040 x 800 x 500 mm, 416 l

--easy-to-clean interior, made of stainless steel, reinforced by deep drawn ribbing with integrated and protected large-area heating on four sides

--2 stainless steel grids

Temperature Range

--from +30 °C (however, at least 5 °C above ambient) up to +70 °C

Voltage / Power Rating

--230 V (+/- 10%), 50/60 Hz

--ca. 1.800 W (during heating)

--adaption of effective heating power depending on the set temperature

Packing Data

--net weight approx. 131 kg

--gross weight carton approx. 156 kg

--dimensions approx.: carton w x h x d: 134 x 131 x 85 cm

--the appliances must be transported upright

Accessories

--Perforated stainless steel shelf E0(x)

--Stainless Steel Grid (for good air circulation) E3(x)

--Interface USB instead of interface RS232 W3

--IQ check list with works test data for oven as support for validation by customer Q1

--OQ check list including one free-selectable temperature distribution survey to DIN 12880: 2007-05 (size 200/300: 9 measuring points, size 400-800: 27 measuring points) with works test data for oven as support for validation by customer Q2